2Komma5cm-Raster

2Komma5cm-Raster by Diehtmar Graumann
2Komma5cm-Raster a photo by Diehtmar Graumann on Flickr.

Eine neue Aufspannplatte musste her…
Sie soll zum Schutz der T-Nuten-Platte dienen und eine feinere Art der Aufspannung schaffen.

Nach dem Planfräsen wurde ein Raster mit 25mm Abstand gefräst und mit 6mm Gewinde versehen…

Ob die Gewinde mühsam nach jedem Fräsdurchgang gesäubert werden müssen, wird sich erst noch zeigen.

Fräserei
DSCI0214
2Komma5cm-Raster by Diehtmar Graumann
2Komma5cm-Raster a photo by Diehtmar Graumann on Flickr.
Eine neue Aufspannplatte musste her...
Sie soll zum Schutz der T-Nuten-Platte dienen und eine feinere Art der Aufspannung schaffen.

Nach dem Planfräsen wurde ein Raster mit 25mm Abstand gefräst und mit 6mm Gewinde versehen...

Ob die Gewinde mühsam nach jedem Fräsdurchgang gesäubert werden müssen, wird sich erst noch zeigen.






Fräserei


DSCI0214

2Komma5cm-Raster

2Komma5cm-Raster by Diehtmar Graumann
2Komma5cm-Raster a photo by Diehtmar Graumann on Flickr.

Eine neue Aufspannplatte musste her…
Sie soll zum Schutz der T-Nuten-Platte dienen und eine feinere Art der Aufspannung schaffen.

Nach dem Planfräsen wurde ein Raster mit 25mm Abstand gefräst und mit 6mm Gewinde versehen…

Ob die Gewinde mühsam nach jedem Fräsdurchgang gesäubert werden müssen, wird sich erst noch zeigen.

Fräserei
DSCI0214
2Komma5cm-Raster by Diehtmar Graumann
2Komma5cm-Raster a photo by Diehtmar Graumann on Flickr.
Eine neue Aufspannplatte musste her...
Sie soll zum Schutz der T-Nuten-Platte dienen und eine feinere Art der Aufspannung schaffen.

Nach dem Planfräsen wurde ein Raster mit 25mm Abstand gefräst und mit 6mm Gewinde versehen...

Ob die Gewinde mühsam nach jedem Fräsdurchgang gesäubert werden müssen, wird sich erst noch zeigen.






Fräserei


DSCI0214

Good looking Printer…

Hi Guys,While waiting for a solution for the bottom stickiness I spent sometime “beautifying” the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.Really lo…

Hi Guys,

While waiting for a solution for the bottom stickiness I spent sometime "beautifying" the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.

Really looks nice now...








Most of the things are made from acrylic sheet. The transparent red acrylic protects the building area from external light.. pretty cool...

Cheers,

Jr





Good looking Printer…

Hi Guys,While waiting for a solution for the bottom stickiness I spent sometime “beautifying” the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.Really lo…

Hi Guys,

While waiting for a solution for the bottom stickiness I spent sometime "beautifying" the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.

Really looks nice now...








Most of the things are made from acrylic sheet. The transparent red acrylic protects the building area from external light.. pretty cool...

Cheers,

Jr





Good looking Printer…

Hi Guys,While waiting for a solution for the bottom stickiness I spent sometime “beautifying” the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.Really lo…

Hi Guys,

While waiting for a solution for the bottom stickiness I spent sometime "beautifying" the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.

Really looks nice now...








Most of the things are made from acrylic sheet. The transparent red acrylic protects the building area from external light.. pretty cool...

Cheers,

Jr





Good looking Printer…

Hi Guys,While waiting for a solution for the bottom stickiness I spent sometime “beautifying” the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.Really lo…

Hi Guys,

While waiting for a solution for the bottom stickiness I spent sometime "beautifying" the printer, actually most of the things I have done are was mainly to avoid external light source that could cure the resin and improve the printer.

Really looks nice now...








Most of the things are made from acrylic sheet. The transparent red acrylic protects the building area from external light.. pretty cool...

Cheers,

Jr





IT WORKS!!!!! :)

Hi Guys,INCREDIBLE!!!!!! I have just printed my first object on the 3d printer… still many things to adjust but the process works very well!!!Please see the pictures.Cheers,Junior

Hi Guys,

INCREDIBLE!!!!!! I have just printed my first object on the 3d printer... still many things to adjust but the process works very well!!!

Please see the pictures.

Cheers,

Junior










IT WORKS!!!!! :)

Hi Guys,INCREDIBLE!!!!!! I have just printed my first object on the 3d printer… still many things to adjust but the process works very well!!!Please see the pictures.Cheers,Junior

Hi Guys,

INCREDIBLE!!!!!! I have just printed my first object on the 3d printer... still many things to adjust but the process works very well!!!

Please see the pictures.

Cheers,

Junior










IT WORKS!!!!! :)

Hi Guys,INCREDIBLE!!!!!! I have just printed my first object on the 3d printer… still many things to adjust but the process works very well!!!Please see the pictures.Cheers,Junior

Hi Guys,

INCREDIBLE!!!!!! I have just printed my first object on the 3d printer... still many things to adjust but the process works very well!!!

Please see the pictures.

Cheers,

Junior










IT WORKS!!!!! :)

Hi Guys,INCREDIBLE!!!!!! I have just printed my first object on the 3d printer… still many things to adjust but the process works very well!!!Please see the pictures.Cheers,Junior

Hi Guys,

INCREDIBLE!!!!!! I have just printed my first object on the 3d printer... still many things to adjust but the process works very well!!!

Please see the pictures.

Cheers,

Junior